XY-WTH1 Temperature and humidity control module high precision digital displayword double output automatic constant temperature and humidity control panelProduct adopts industrial-grade chip, high-precision SHT20 temperature andhumidity sensor.
FUNCTION
Product features are two main types of classification: the functions of temperatureand humidity;
FUNCTION OF TEMPERATURE ARE AS FOLLOWS
1. The automatic identification of work mode:
The system automatically according to the start/stop temperature, identify work mode
Start temperature > stop temperature, cooling mode C
Start temperature < stop temperature, heating mode H
2. Cooling mode:
When the temperature 2 Start temperature, relay conduction, red led on, refrigerationequipment begin to work,
When the temperature s Stop temperature, relay disconnect, red led off, refrigerationequipment stop to work;
3. Heating mode:
When the temperature s Start temperature, relay conduction, red led on, heatingequipment begin to work;
When the temperature 2 Stop temperature, relay disconnect, red led off, heatingequipment stop to work;
4. emperature correction function OFE(-10.0~10℃):
The system is working for a long time and may be biased, through this function correction, the actual temperature = measuring temperature + calibration value
How to set the start/stop temperature:
1. In the running interface, Long Press TM+ key more than 3 seconds, into thestart temperature settings interface, can be modified by TM+ TM- key, to be modified. waiting for 6s automatic exit and save,
2. In the running interface, Long Press TM- key more than 3 seconds, into thestop temperature settings interface, can be modified by TM+ TM- key, to be modifiedafter the parameters, waiting for 6s automatic exit and save;
THE HUMIDITY FUNCTIONIS AS FOLLOWS
1. The automatic identification of work mode:
The system automatically according to the start/stop humidity, identify work mode:Start humidity> stop humidity, dehumidification mode D
Start humidity< stop humidity, humidification mode E!
2. Dehumidification mode:
When the humidity> Start humidity, relay conduction, green led on, dehumidificationequipment begin to work;
When the humiditys Stop humidity, relay disconnect, green led off, dehumidificationequipment stop to work;
3. Humidification mode:
When the humiditys Start humidity, relay conduction, green led on, humidificationequipment begin to work;
4. Humidification correction function RH (-10.0~10%)
The system is working for a long time and may be biased, through this functioncorrection, the actual humidity = measuring humidity + calibration value:
How to set the start/stop humidity:
1. In the running interface, Long Press RH+ key more than 3 seconds, into thestart humidity settings interface, can be modified by RH + RH - key, to be modified. waiting for 6s automatic exit and save,
2. In the running interface, Long Press RH- key more than 3 seconds, into thestop humidity settings interface, can be modified by RH+ RH- key, to be modifiedafter the parameters, waiting for 6s automatic exit and save.
Running Interface Description:
Working mode shows that the current mode ("H/C",E/d") will be synchronized atthe front of temperature/humidity, when the setting of temperature/humidity andstop temperature/humidity are completed.
Any relay conduction, the upper-left corner of the interface display "out", if thetemperature relay conduction, the flashing display temperature working mode "H/Cto show reminders; if the humidity relay conduction, then flashing display humidityworking mode "E/d", as a reminder;
How to enable/disable relay:
In the running interface, Short press TM- key, enable/disable the temperature relay(ON: enable OFF: disable), back to the running interface, if the temperature relay isdisable, the temperature symbol flashes to remind.
In the running interface, Short press RH- key, enable/disable the humidity relay(ON: enable OFF: disable), back to the running interface, if the humidity relay isdisable, the humidity symbol % flashes, as a reminder.
Serial control(TTL level)
Baud Rate:9600bps Data bits :8
stop bits :1crc :none
Flow control :none
CMD Description
Start Start data upload
stop Stop data upload
read Read the param setting
T:ON Temperature relay enable
T:OFF Temperature relay disable
H:ON Humidity relay enable
H:OFF Humidity relay disable
TS:XX.X Set start Temperature (-20.0~60.0)
TP:XX.X Set stop Temperature (-20.0~60.0)
HS:XX.X Set start Humidity (00.0~100.0)
HP:XX.X Set stop Humidity(00.0~100.0)
TC:XX.X Set Temperature Calibration (-10.0~10.0)
HC:XX.X Set Humidity Calibration (-10.0~10.0)
Temperature and humidity Data upload format Description:
Temperature format: Operating mode (H/C), temperature value, temperature relay status;
Humidity Format: Operating mode (E/D), humidity value, humidity relay status;
H,20.5°,CL : Heating operating mode, the current temperature of 20.5 degrees.temperature relay disconnection state,
D,50.4%,OP : Dehumidification working mode, current humidity 50.4%, humidityrelay connection;
English
中文版