11.1V 12V 12.6V BMS Battery Protection Board Lithium 3s Bms Module

显示的图像仅供参考，从产品数据表中获得准确的规格。

型号:	11.1V 12V 12.6V BMS Battery Protection Board Lithium 3s Bms Module
品牌:
封装:
年份:	new+
描述:	11.1V 12V 12.6V BMS Battery Protection Board Lithium 3s Bms Module
库存:	9999 Pieces
发货时间:	1-2 天
数据手册:

如果您需要获得更多的价格，请将您的RFQ发送至 info@hfd-ic.com

产品介绍

11.1V 12V 12.6V BMS Battery Protection Board Lithium 3s Bms Module 最优惠价格和快速交付.

恒锋达是11.1V 12V 12.6V BMS Battery Protection Board Lithium 3s Bms Module的经销商，我们有库存可立即发货，也可长期供应。请通过电子邮件将您的11.1V 12V 12.6V BMS Battery Protection Board Lithium 3s Bms Module购买计划发送给我们，我们将根据您的计划为您提供最优惠的价格。
我们的电子邮件：info@hfd-ic.com

产品描述

PRODUCT DESCRIPTION

3S 20A 11.1V 12V 12.6V BMS Module Li-ion Lithium Battery 18650 Charger PCB Protection Board

Product Description:

3 strings of 12.6V lithium battery protection boards
Application: Nominal voltage 3.6V, 3.7V lithium battery (including 18650, 26650, polymer lithium battery)
Product size: 50*16.5*3mm
Product weight: 2.4g
Charging voltage: 12.6V-13.6V Continuous discharge current (upper limit) : 10A (If the heat dissipation environment is not good, please reduce the load current)
Continuous charging current (upper limit) : 5A
Note: The PCB baseboards of 5A and 10A are the same, the difference is that 5A has 2 MOS tubes and 10A has 4 MOS tubes.

Note:

Connect 0V, 4.2V, 8.4V, 12.6V strictly according to the drawing (0V or 12.6V is connected to the wrong burning plate, 4.2V or 8.4V is connected to the wrong plate and does not work). Note 2: When there is a load of brush motor, a non-polar capacitor (25V +, 10uF-100uF) must be connected in parallel to the positive and negative terminals of the motor to prevent the reverse peak voltage generated by the motor from interfering.

产品介绍

产品描述

3S 20A 11.1V 12V 12.6V BMS Module Li-ion Lithium Battery 18650 Charger PCB Protection Board

Product Description:

Note:

快速询价